Primer 945 can be used for the frame joint of Touchscreen phone, tablet, GPS navigator, and resistors and so on.It also is an adhesion promoter for use in
conjunction with Architectural finishes.
Typical Physical properties and Performance Characteristics
Note:The following technical information and data should be considered representative or
typical only and should not be used for specification purposes
Solids |
Approximately 5%-8% |
Color |
clear light yellow |
Flash point |
-4?(-20?) |
Net Weight |
750-800grams per liter |
Viscosity |
10±5cps |
Application Techniques
Surface preparation:
The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.
Application: Shake CNHYBOND 945 primer well before using:
1. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 945 primer to dry thoroughly before
applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape.
Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..
2. Allow first application of primer to dry before applying the second coat, CNHYBOND primer 945 may be applied with brush or swab, It can also be applied
with a pressurized flow gun, knurled roller or other similar type of application equipment
Clean up:
Cnhybond945 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required
Shelf life
1. 12 months from date of manufacture when stored in the original container at 15-27?
2. Keep cnhybond tape primer 945 in the original container
3. Keep original container tightly sealed to avoid solvent evaporation
| Product Showcase |
|
| Product Place Origin |
|
| Product Nature Use |
|
| Domestic Payment Terms |
|
| Total Domestic Tax |
|
| Keyword |
|
| Product COA |
|
| Product detail description |
<p>Primer 945 can be used for the frame joint of Touchscreen phone, tablet, GPS navigator, and resistors and so on.It also is an adhesion promoter for use in</p>
<p> conjunction with Architectural finishes.</p>
<p> </p>
<p>Typical Physical properties and Performance Characteristics </p>
<p>Note:The following technical information  and data should be considered representative or  </p>
<p>typical only and should not be used for specification purposes </p>
<table>
<tbody>
<tr>
<td width="216" valign="top"><p>Solids </p></td>
<td width="220" valign="top"><p> Approximately 5%-8% </p></td>
</tr>
<tr>
<td width="216" valign="top"><p>Color   </p></td>
<td width="220" valign="top"><p>    clear light yellow </p></td>
</tr>
<tr>
<td width="216" valign="top"><p>Flash point  </p></td>
<td width="220" valign="top"><p>      -4?(-20?) </p></td>
</tr>
<tr>
<td width="216" valign="top"><p>Net Weight   </p></td>
<td width="220" valign="top"><p>      750-800grams per liter </p></td>
</tr>
<tr>
<td width="216" valign="top"><p>Viscosity      </p></td>
<td width="220" valign="top"><p>      10±5cps </p></td>
</tr>
</tbody>
</table>
<p>Application Techniques </p>
<p>Surface preparation: </p>
<p>The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used. </p>
<p>Application: Shake CNHYBOND 945 primer well before using: </p>
<p>1. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 945 primer to dry thoroughly before </p>
<p>applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape.</p>
<p> Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion.. </p>
<p>2. Allow first application of primer to dry before applying the second coat, CNHYBOND primer 945 may be applied with brush or swab, It can also be applied </p>
<p>with a pressurized flow gun, knurled roller or other similar type of application equipment </p>
<p>Clean up: </p>
<p>Cnhybond945 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required </p>
<p>Shelf life </p>
<p>1. 12 months from date of manufacture when stored in the original container at 15-27? </p>
<p>2. Keep cnhybond tape primer 945 in the original container </p>
<p>3. Keep original container tightly sealed to avoid solvent evaporation</p> |