Tape primer 944 is an adhesion promoter for use in conjunction with automotive restyling vinyl, vehicle graphics and wraps. Help protect vinyl against lifting when used for vehicle graphics,stripes and wraps.
 
Feature:speed up free tack time, promote the adhesion
 
Application: Primer 944 is use to improve vinyl adhesion where vinyl will be stretched or heated into concave area. For best results apply a thin layer of primer 944 over most of the concave area. For convex area apply a thin layer at outer edges of the curve to prevent the film edge, lifting. Great for use on complex vehicle contours. Work with all brands of vinyl.
 
Typical Physical properties and Performance Characteristics
Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes
Solids: Approximately 5%-8%
Color: clear light yellow
Flashpoint: -4? (-20?)
Net Weight: 780-800grams per liter
Viscosity: 40±5cps
Application Techniques
Surface preparation:
The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.
Application: Shake CNHYBOND 944 primer well before using:
1. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..
2. Allow first application of primer to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment
(3).Drying Time
Drying time generally depends on the temperature, humidity,thickness of coating.
Normal drying time:1 minute-1 hour
The best drying time:10-30minutes(temperature:23?, moisture65%)
Keep coating surface clean while operating
(4).Stick double sided tapes
Stick double sided tapes to the surface of coating, and press it strongly.
 
Clean up:
Cnhybond 944 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required
Shelf life
1. 12 months from date of manufacture when stored in the original container at 15-27?
2. Keep cnhybond tape primer 944 in the original container
3. Keep original container tightly sealed to avoid solvent evaporation
Product Showcase |
|
Product Place Origin |
|
Product Nature Use |
|
Domestic Payment Terms |
|
Total Domestic Tax |
|
Keyword |
|
Product COA |
|
Product detail description |
<p>Tape primer 944 is an adhesion promoter for use in conjunction with automotive restyling vinyl, vehicle graphics and wraps. Help protect vinyl against lifting when used for vehicle graphics,stripes and wraps.</p>
<p>&nbsp</p>
<p>Feature:speed up free tack time, promote the adhesion</p>
<p>&nbsp</p>
<p>Application: Primer 944 is use to improve vinyl adhesion where vinyl will be stretched or heated into concave area. For best results apply a thin layer of primer 944 over most of the concave area. For convex area apply a thin layer at outer edges of the curve to prevent the film edge, lifting. Great for use on complex vehicle contours. Work with all brands of vinyl.</p>
<p>&nbsp</p>
<p>Typical Physical properties and Performance Characteristics</p>
<p>Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes</p>
<p>Solids: Approximately 5%-8%</p>
<p>Color: clear light yellow</p>
<p>Flashpoint: -4? (-20?)</p>
<p>Net Weight: 780-800grams per liter</p>
<p>Viscosity: 40±5cps</p>
<p>Application Techniques</p>
<p>Surface preparation:</p>
<p>The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.</p>
<p>Application: Shake CNHYBOND 944 primer well before using:</p>
<p>1. Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..</p>
<p>2. Allow first application of primer to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment</p>
<p>(3).Drying Time</p>
<p>Drying time generally depends on the temperature, humidity,thickness of coating. <br>
Normal drying time:1 minute-1 hour <br>
The best drying time:10-30minutes(temperature:23?, moisture65%) </p>
<p>Keep coating surface clean while operating</p>
<p>(4).Stick double sided tapes <br>
Stick double sided tapes to the surface of coating, and press it strongly. </p>
<p>&nbsp</p>
<p>Clean up:</p>
<p>Cnhybond 944 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required</p>
<p>Shelf life</p>
<p>1. 12 months from date of manufacture when stored in the original container at 15-27?</p>
<p>2. Keep cnhybond tape primer 944 in the original container</p>
<p>3. Keep original container tightly sealed to avoid solvent evaporation</p>
<p></p>
|