Ball mill for cement clinker powder, mica powder, iron ore powder production
Ball mill is an efficient tool for grinding materials like rocks, raw-of-mine ores in a tumbling mill with the presence of metallic balls or other media into fine powder. There are two ways of grinding: the dry process and the wet process. It can be divided into tabular type and flowing type according to different forms of discharging material.
The ball mill capacity is from 0.65 TPH(small capacity ball mill) to 30 TPH(large capacity ball mill) according the ball mill size and the raw materials.
- Ball mills for use of metallic media or ceramic media
- 14 models for your choice
- Automatic operation saves power
- Suit the most complicated circuits and complex ores;
- Feed size is 80% passing 4mm for hard ores and 80% passing 1" (25mm or finer) for soft ores
- Product size is typically 0.074mm or finer
Ball Mill Industry Application
ball mill is a key equipment for fine grinding, regrinding etc. Our ball mill can grind crushed ore or other materials that can be grinded either by wet process or by dry process.
Where size control of the final product is important, closed circuit grinding is the most efficient method ofoperation. The production of a higher quality product at a lower cost justifies the additional capital investment.
SBM fine powder ball mill can be used as cement clinker ball mill, coal ball mill, limestone ball mill, iron ore ball mill.
The common minerals can be crushed by ball mill are:
Granite |
Limestone |
Basalt |
Quartz |
river stone |
Mica |
Feldspar |
Calcium Carbonate |
Clay |
Mica |
Bentonite |
Cement clinker |
Dolomite |
Iron ore |
Gold ore |
Ball mill features
- Single stage fine grinding
- Regrinding
- Second stage in two stage grinding circuits
Model |
Rotate Speed (r/min) |
Grinding Media Weight (t) |
Max. Feeding Size(mm) |
Discharge Size (mm) |
Output Capacity(t/h) |
Motor Power (kw) |
?900×1800 |
36~38 |
1.5 |
≤20 |
0.075-0.89 |
0.65-2 |
18.5 |
?900×3000 |
36 |
2.7 |
≤20 |
0.075-0.89 |
1.1-3.5 |
22 |
?1200×2400 |
36 |
3 |
≤25 |
0.075-0.6 |
1.5-4.8 |
30 |
?1200×3000 |
36 |
3.5 |
≤25 |
0.074-0.4 |
1.6-5 |
37 |
?1200×4500 |
32.4 |
5 |
≤25 |
0.074-0.4 |
1.6-5.8 |
55 |
?1500×3000 |
29.7 |
7.5 |
≤25 |
0.074-0.4 |
2-5 |
75 |
?1500×4500 |
27 |
11 |
≤25 |
0.074-0.4 |
3-6 |
110 |
?1500×5700 |
28 |
12 |
≤25 |
0.074-0.4 |
3.5-6 |
130 |
?1830×3000 |
25.4 |
11 |
≤25 |
0.074-0.4 |
4-10 |
130 |
?1830×4500 |
25.4 |
15 |
≤25 |
0.074-0.4 |
4.5-12 |
155 |
?1830×6400 |
24.1 |
21 |
≤25 |
0.074-0.4 |
6.5-15 |
210 |
?1830×7000 |
24.1 |
23 |
≤25 |
0.074-0.4 |
7.5-17 |
245 |
?2100×3000 |
23.7 |
15 |
≤25 |
0.074-0.4 |
6.5-36 |
155 |
?2100×4500 |
23.7 |
24 |
≤25 |
0.074-0.4 |
8-43 |
245 |
?2100×7000 |
23.7 |
26 |
≤25 |
0.074-0.4 |
8-48 |
280 |
?2200×4500 |
21.5 |
27 |
≤25 |
0.074-0.4 |
9-45 |
280 |
?2200×6500 |
21.7 |
35 |
≤25 |
0.074-0.4 |
14-26 |
380 |
?2200×7000 |
21.7 |
35 |
≤25 |
0.074-0.4 |
15-28 |
380 |
?2200×7500 |
21.7 |
35 |
≤25 |
0.074-0.4 |
15-30 |
380 |
?2400×3000 |
21 |
23 |
≤25 |
0.074-0.4 |
7-50 |
245 |
?2400×4500 |
21 |
30 |
≤25 |
0.074-0.4 |
8.5-60 |
320 |
?2700×4000 |
20.7 |
40 |
≤25 |
0.074-0.4 |
12-80 |
400 |
?2700×4500 |
20.7 |
48 |
≤25 |
0.074-0.4 |
12-90 |
430 |
?3200×4500 |
18 |
65 |
≤25 |
0.074-0.4 |
According to the process condition |
800 |