Primer 944 is widely applied in rubber sealing strip, engine valve cover seal strip,plastic steel door and window rubber sealing strip,
Car door weather stripping,side window seals, Window Weatherstrip,Sunroof Seal,Primary Door Seal,Glass run-channel seals,Trunk weatherstrip,Anti-dust and Anti-noise Rubber Edge Seal Strip for car door,Car decorative strips,PP Seal strip,EPDM rubber seal strip.
Typical Physical properties and Performance Characteristics
Note: The following technical information and data should be considered representative or typical only and should not be used
for specification purposes
Solids: Approximately 5%-8%
Color: clear light yellow
Flashpoint: -4? (-20?)
Net Weight: 780-800grams per liter
Viscosity: 40±5cps
Application Techniques
1.Surface preparation:
The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol
and water mixture,A clean lint-free cloth should be used.
2.Application: Shake CNHYBOND 944 primer well before using:
(1).Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow
cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature,
Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application
of CNHYBOND 944 primer for uniform coverage and good adhesion..
(2). Allow first application of primer to dry before applying the second coat, CNHYBOND primer 944 may be applied with
brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment
(3).Drying Time
Drying time generally depends on the temperature, humidity,thickness of coating.
Normal drying time:1 minute-1 hour
The best drying time:10-30minutes(temperature:23?, moisture65%)
Keep coating surface clean while operating
(4).Stick double sided tapes
Stick double sided tapes to the surface of coating, and press it strongly.
Clean up:
Cnhybond 944 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required
Shelf life
1. 12 months from date of manufacture when stored in the original container at 15-27?
2. Keep cnhybond tape primer 944 in the original container
3. Keep original container tightly sealed to avoid solvent evaporation
| Product Showcase |
|
| Product Place Origin |
|
| Product Nature Use |
|
| Domestic Payment Terms |
|
| Total Domestic Tax |
|
| Keyword |
|
| Product COA |
|
| Product detail description |
<p>Primer 944 is widely applied in rubber sealing strip, engine valve cover seal strip,plastic steel door and window rubber sealing strip,</p>
<p>Car door weather stripping,side window seals, Window Weatherstrip,Sunroof Seal,Primary Door Seal,Glass run-channel seals,Trunk weatherstrip,Anti-dust and Anti-noise Rubber Edge Seal Strip for car door,Car decorative strips,PP Seal strip,EPDM rubber seal strip.</p>
<p>&nbsp</p>
<p>Typical Physical properties and Performance Characteristics</p>
<p>Note: The following technical information and data should be considered representative or typical only and should not be used</p>
<p> for specification purposes</p>
<p>Solids: Approximately 5%-8%</p>
<p>Color: clear light yellow</p>
<p>Flashpoint: -4? (-20?)</p>
<p>Net Weight: 780-800grams per liter</p>
<p>Viscosity: 40±5cps</p>
<p>Application Techniques</p>
<p>1.Surface preparation:</p>
<p>The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol </p>
<p>and water mixture,A clean lint-free cloth should be used.</p>
<p>2.Application: Shake CNHYBOND 944 primer well before using:</p>
<p>(1).Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow </p>
<p>cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, </p>
<p>Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application </p>
<p>of CNHYBOND 944 primer for uniform coverage and good adhesion..</p>
<p>(2). Allow first application of primer to dry before applying the second coat, CNHYBOND primer 944 may be applied with </p>
<p>brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment</p>
<p>(3).Drying Time</p>
<p>Drying time generally depends on the temperature, humidity,thickness of coating. <br>
Normal drying time:1 minute-1 hour <br>
The best drying time:10-30minutes(temperature:23?, moisture65%) </p>
<p>Keep coating surface clean while operating</p>
<p>(4).Stick double sided tapes <br>
Stick double sided tapes to the surface of coating, and press it strongly. </p>
<p>&nbsp</p>
<p>Clean up:</p>
<p>Cnhybond 944 primer can be removed with isopropyl alcohol,Vigorous scrubbing may be required</p>
<p>Shelf life</p>
<p>1. 12 months from date of manufacture when stored in the original container at 15-27?</p>
<p>2. Keep cnhybond tape primer 944 in the original container</p>
<p>3. Keep original container tightly sealed to avoid solvent evaporation</p> |